Tub-to-shower conversion with tiled walk-in shower installed by BathPeak in a 1990s two-story near Harmon Lane in Kernersville, Forsyth County NC

Kernersville, NC · Forsyth County

Tub-to-Shower Conversions in Kernersville, NC

Replace the one-piece fiberglass tub surround in your Kernersville hall bath with a tiled shower.

Typical investment
$8,991 – $14,991
Timeline
Project-specific timeline
Warranty
1-year workmanship

Tub-to-Shower Conversion for Kernersville homes

Kernersville's 1970s and 80s homes near Main Street and Harmon Lane often have a one-piece fiberglass tub surround. Those units were set in before the walls were closed, so they usually have to be cut out in pieces.

Once it's out, we check the walls and floor, then build the new shower with proper waterproofing and your choice of tile or panels.

BathPeak's general conversion range is $8,991–$14,991. You get one written package price with the full scope of work.

See everything we do in Kernersville, or compare the full tub-to-shower conversion guide for our whole Piedmont Triad, NC service area.

Free Kernersville tub-to-shower conversion quote

Or call (336) 300-2524 and speak with our team now.

BathPeak serves Kernersville as part of its Piedmont Triad, North Carolina service area.

  1. Step 1: Project
  2. Step 2: Location
  3. Step 3: Timing
  4. Step 4: Investment
  5. Step 5: Contact

Step 1 of 5 · Project

What are you interested in?

Fully insured in NCRemodeling roots since 202230+ years combined install experience
Prefer to talk? Call (336) 300-2524
  • Fully insured in North Carolina
  • Permit requirements explained up front
  • Written package pricing · changes approved in writing
  • Project-specific timeline

Why Kernersville homeowners choose BathPeak

  • Free in-home consultation
  • Written project scope
  • Written package pricing
  • Changes approved in writing
  • Project-specific timeline
  • Daily cleanup and communication
  • 1-year workmanship warranty
  • Insured
  • Experienced installation team
  • Serving Kernersville
See how a BathPeak project works →

What a tub-to-shower conversion in Kernersville includes

Tub removal and haul-off

Cast-iron or steel tub cut out and removed, surround stripped, and the alcove opened to bare framing.

Framing and subfloor check

Any rot at the old tub apron repaired, studs corrected, and blocking added for bars and glass.

Drain conversion

The 1.5-inch tub drain converted to a 2-inch shower drain, correctly trapped and vented to code.

Shower pan

A sloped, bonded pan built to the alcove — no pre-formed base fighting an out-of-square wall unless you prefer one.

Waterproof membrane

Full bonded waterproofing over pan and walls, corners detailed by hand, flood tested before tile.

Tile or panel walls

Porcelain tile or low-maintenance solid-surface panels, set plumb with sealed grout and proper movement joints.

Tub-to-Shower Conversion pricing in Kernersville

$8,991 – $14,991

Older Forsyth County homes occasionally need drain or subfloor correction. We check for it during the estimate so it is in the written price up front.

Financing is available through Momnt Financing. Ask our team about current options during your consultation.

What moves the price

  • Tile versus solid-surface wall panels
  • Frameless glass, semi-frameless or a fixed panel
  • Drain resizing and re-venting in older homes
  • Subfloor repair at the old tub apron
  • Bench, niches and grab-bar blocking

How your Kernersville project runs

Timelines depend on scope and site conditions; you get a project-specific schedule before work begins. Custom glass can affect the overall schedule because final measurements and fabrication may occur after the shower area is installed.

  1. Step 1

    In-home consultation

    We measure the alcove, check drain size and framing, price the conversion in writing and review tile options.

  2. Step 2

    Order and schedule

    Approval releases materials; your install date is locked, typically 10 to 21 days out.

  3. Step 3

    Tub out

    Demo, framing and subfloor repair, drain conversion, pan built.

  4. Step 4

    Waterproof and tile

    Membrane, flood test, then wall and floor tile.

  5. Step 5

    Trim out

    Grout, valve trim, niche and bar install, glass template, full cleanup.

  6. Step 6

    Walkthrough

    We run the shower with you, check drainage and slope, and hand over the written warranty.

More detail on our full process and what the warranty covers.

Converting a Kernersville hall bath

Cutting out one-piece units

Removal is planned to protect surrounding walls and floors.

Waterproofing

Tile walls need a proper waterproofing layer behind them.

Older floors

Checked once the unit is out.

Tub-to-Shower Conversion questions from Kernersville homeowners

More answers on our FAQ page.

Other bathroom services in Kernersville

Ready for your Kernersville tub-to-shower conversion?

Use the form above or request your free Kernersville quote on our contact page.

Call Now