Bathroom Remodeling Costs · Piedmont Triad

Average Cost of a Bathroom Remodel in Greensboro, NC (2026)

Real 2026 price ranges for hall baths, primary baths and tub-to-shower conversions in Greensboro — and the five conditions in Guilford County housing stock that push a quote up.

BathPeak Editorial Team· Reviewed by Moe Moustafa, Founder of BathPeakUpdated August 28, 20268 min read

Key takeaways

  • BathPeak full bathroom remodels commonly fall within a general $18,991–$39,991 range; a same-layout hall bath generally sits lower in that range than a primary suite.
  • Primary bath remodels with a tiled walk-in shower, layout changes or premium finishes tend toward the upper end of that range.
  • Tub-to-shower conversions commonly fall within BathPeak's general $8,991–$14,991 range.
  • In older homes, subfloor repair, aging supply lines and undersized circuits are common reasons a quote moves up.
  • Permit requirements vary by project and jurisdiction in Guilford County; BathPeak will explain any that apply during planning.

The short answer

BathPeak full bathroom remodels commonly fall within a general investment range of $18,991 to $39,991 depending on scope, materials, layout changes, and site conditions. That is a wide band because it covers everything from replacing a tub, surround and vanity in a 40-square-foot hall bath to gutting a primary suite, moving the drain and tiling floor to ceiling.

The useful way to budget is by room type rather than by average. Below are BathPeak's general ranges, all-in: labor, materials, demo, haul-away, and finish plumbing and electrical.

BathPeak general price ranges, 2026
Project typeTypical rangeTimeline
Tub-to-shower conversion$8,991 – $14,991Project-specific
Full bathroom remodel$18,991 – $39,991Project-specific
BathPeak general price ranges, 2026

What actually moves the number in Greensboro

Two similar houses can produce very different quotes. The difference usually comes down to a handful of conditions, several of which are hidden until walls and floors are opened — which is exactly why we check for them and price them before you sign, not after.

  • Subfloor rot under a cast-iron tub. More likely in older homes; repairs are priced after the condition is confirmed.
  • Galvanized or polybutylene supply lines. Replacing them is priced separately when found.
  • Layout changes. Moving a toilet flange or shower drain means opening the floor and re-venting, which adds labor — a shower drain relocation commonly falls within a general $1,000–$3,500 range — and permit requirements vary by project and jurisdiction.
  • Tile choice and pattern. A 12x24 straight-set porcelain wall costs far less to set than a herringbone or a mosaic feature wall; labor, not material, drives that gap.
  • Electrical bring-up. Older baths on a shared 15-amp circuit need a dedicated GFCI circuit and often an exhaust fan ducted to the exterior, quoted when needed.

Where Greensboro sits against the national number

National cost reports are averages across very different markets. BathPeak's general ranges apply across all of our North Carolina service areas, and the same tub or tile costs about the same wherever it is installed.

That is why scope discipline saves more money here than shopping contractors does. Keeping the existing footprint, reusing the drain location and choosing a large-format tile is usually worth more than any discount you can negotiate.

Ways to spend less without regretting it

  • Keep plumbing where it is. The single biggest lever in any budget.
  • Convert instead of replacing. If nobody uses the tub, a walk-in shower conversion delivers a new-bathroom feeling for a fraction of a gut remodel.
  • Spend on waterproofing, save on décor. A properly sheeted and sealed shower pan is invisible and non-negotiable; a fancy mirror can wait.
  • Do both baths in one mobilization. A second bathroom in the same visit generally costs less than booking it separately next year, because setup, protection and mobilization are shared.
  • Protect the shower budget before anything else. Cutting the shower scope is the change homeowners regret most.

What a written Greensboro quote should include

Insist on a written quote that spells out the full scope of work. A complete estimate names the shower pan and waterproofing system, the tile size and setting pattern, the valve brand and finish, the exhaust fan CFM, whether a permit is required, the haul-away, and the daily protection plan for floors and HVAC returns. If a quote does not name the waterproofing method, it is not a real quote.

Next steps

If this guide matches your plans, our page on full bathroom remodels explains scope, pricing and what to expect. Homeowners near Greensboro can also read about full bathroom remodeling in Greensboro. Ready to price your own bathroom? Book a free in-home consultation.

← Back to all BathPeak remodeling guides

Frequently asked questions

About the author

BathPeak Editorial Team — Bathroom remodeling writers

The BathPeak editorial team writes our cost, planning and accessibility guides using the pricing, scheduling and installation details our own bathroom remodeling crews work with every day in North Carolina.

Reviewed for accuracy by Moe Moustafa, Founder of BathPeak.

Get a written price for your bathroom

Free in-home consultation, package quote with the full scope of work, no pressure. Prefer to talk it through? Call (336) 300-2524

Fully insured in NCRemodeling roots since 202230+ years combined install experience
  1. Step 1: Project
  2. Step 2: Location
  3. Step 3: Timing
  4. Step 4: Investment
  5. Step 5: Contact

Step 1 of 5 · Project

What are you interested in?

Fully insured in NCRemodeling roots since 202230+ years combined install experience
Prefer to talk? Call (336) 300-2524
Call Now