Tub-to-shower conversion with tiled walk-in shower installed by BathPeak in a compact post-war home off South Main Street in High Point, Guilford County NC

High Point, NC · Guilford County

Tub-to-Shower Conversions in High Point, NC

Turn a standard 60-inch tub alcove in your High Point home into a low-threshold shower that's easier to step into.

Typical investment
$8,991 – $14,991
Timeline
Project-specific timeline
Warranty
1-year workmanship

Tub-to-Shower Conversion for High Point homes

The standard 60-inch tub alcove is common in High Point hall baths. Swapping that tub for a shower with a lower entry is one of the most practical changes for a small bathroom.

We remove the tub, check the walls and floor underneath, and confirm the drain and valve suit the new shower base. You choose between tile or wall panels, a glass panel or door, and extras like a handheld shower or seat.

BathPeak's general conversion range is $8,991–$14,991. You get one written package price with the full scope of work and a project-specific timeline before work begins.

See everything we do in High Point, or compare the full tub-to-shower conversion guide for our whole Piedmont Triad, NC service area.

Free High Point tub-to-shower conversion quote

Or call (336) 300-2524 and speak with our team now.

BathPeak serves High Point as part of its Piedmont Triad, North Carolina service area.

  1. Step 1: Project
  2. Step 2: Location
  3. Step 3: Timing
  4. Step 4: Investment
  5. Step 5: Contact

Step 1 of 5 · Project

What are you interested in?

Fully insured in NCRemodeling roots since 202230+ years combined install experience
Prefer to talk? Call (336) 300-2524
  • Fully insured in North Carolina
  • Permit requirements explained up front
  • Written package pricing · changes approved in writing
  • Project-specific timeline

Why High Point homeowners choose BathPeak

  • Free in-home consultation
  • Written project scope
  • Written package pricing
  • Changes approved in writing
  • Project-specific timeline
  • Daily cleanup and communication
  • 1-year workmanship warranty
  • Insured
  • Experienced installation team
  • Serving High Point
See how a BathPeak project works →

What a tub-to-shower conversion in High Point includes

Shower pan

A sloped, bonded pan built to the alcove — no pre-formed base fighting an out-of-square wall unless you prefer one.

Waterproof membrane

Full bonded waterproofing over pan and walls, corners detailed by hand, flood tested before tile.

Tile or panel walls

Porcelain tile or low-maintenance solid-surface panels, set plumb with sealed grout and proper movement joints.

Valve and fixtures

New pressure-balancing valve, showerhead and handheld, plus a recessed niche and optional bench.

Glass and finish

Semi-frameless or frameless glass templated after tile, silicone detailed, and the room left clean.

Tub removal and haul-off

Cast-iron or steel tub cut out and removed, surround stripped, and the alcove opened to bare framing.

Tub-to-Shower Conversion pricing in High Point

$8,991 – $14,991

Older Guilford County homes occasionally need drain or subfloor correction. We check for it during the estimate so it is in the written price up front.

Financing is available through Momnt Financing. Ask our team about current options during your consultation.

What moves the price

  • Tile versus solid-surface wall panels
  • Frameless glass, semi-frameless or a fixed panel
  • Drain resizing and re-venting in older homes
  • Subfloor repair at the old tub apron
  • Bench, niches and grab-bar blocking

How your High Point project runs

Timelines depend on scope and site conditions; you get a project-specific schedule before work begins. Custom glass can affect the overall schedule because final measurements and fabrication may occur after the shower area is installed.

  1. Step 1

    In-home consultation

    We measure the alcove, check drain size and framing, price the conversion in writing and review tile options.

  2. Step 2

    Order and schedule

    Approval releases materials; your install date is locked, typically 10 to 21 days out.

  3. Step 3

    Tub out

    Demo, framing and subfloor repair, drain conversion, pan built.

  4. Step 4

    Waterproof and tile

    Membrane, flood test, then wall and floor tile.

  5. Step 5

    Trim out

    Grout, valve trim, niche and bar install, glass template, full cleanup.

  6. Step 6

    Walkthrough

    We run the shower with you, check drainage and slope, and hand over the written warranty.

More detail on our full process and what the warranty covers.

Converting a tub in a High Point home

Lower step-in height

How low the entry can go depends on the floor and drain. We confirm it before quoting.

Keeping the footprint

Staying within the existing alcove often keeps plumbing changes to a minimum.

Glass in a small room

A glass panel instead of a curtain can make a small bathroom feel larger.

Tub-to-Shower Conversion questions from High Point homeowners

More answers on our FAQ page.

Other bathroom services in High Point

Ready for your High Point tub-to-shower conversion?

Use the form above or request your free High Point quote on our contact page.

Call Now