Tub-to-shower conversion with tiled walk-in shower installed by BathPeak in a 1960s brick ranch near old downtown Conover, Catawba County NC

Conover, NC · Catawba County

Tub-to-Shower Conversions in Conover, NC

Change how a small Conover hall bath works by replacing the tub with a shower and a shallower vanity.

Typical investment
$8,991 – $14,991
Timeline
Project-specific timeline
Warranty
1-year workmanship

Tub-to-Shower Conversion for Conover homes

In Conover, a popular project is converting the tub in a hall bath under 50 square feet.

Removing the tub and using a shallower vanity can change how the whole room feels and works.

BathPeak's general conversion range is $8,991–$14,991. You get one written package price with the full scope of work. BathPeak provides a project-specific schedule before work begins.

See everything we do in Conover, or compare the full tub-to-shower conversion guide for our whole Gastonia & Lincolnton, NC service area.

Free Conover tub-to-shower conversion quote

Or call (336) 300-2524 and speak with our team now.

BathPeak serves Conover as part of its Gastonia & Lincolnton, North Carolina service area.

  1. Step 1: Project
  2. Step 2: Location
  3. Step 3: Timing
  4. Step 4: Investment
  5. Step 5: Contact

Step 1 of 5 · Project

What are you interested in?

Fully insured in NCRemodeling roots since 202230+ years combined install experience
Prefer to talk? Call (336) 300-2524
  • Fully insured in North Carolina
  • Permit requirements explained up front
  • Written package pricing · changes approved in writing
  • Project-specific timeline

Why Conover homeowners choose BathPeak

  • Free in-home consultation
  • Written project scope
  • Written package pricing
  • Changes approved in writing
  • Project-specific timeline
  • Daily cleanup and communication
  • 1-year workmanship warranty
  • Insured
  • Experienced installation team
  • Serving Conover
See how a BathPeak project works →

What a tub-to-shower conversion in Conover includes

Waterproof membrane

Full bonded waterproofing over pan and walls, corners detailed by hand, flood tested before tile.

Tile or panel walls

Porcelain tile or low-maintenance solid-surface panels, set plumb with sealed grout and proper movement joints.

Valve and fixtures

New pressure-balancing valve, showerhead and handheld, plus a recessed niche and optional bench.

Glass and finish

Semi-frameless or frameless glass templated after tile, silicone detailed, and the room left clean.

Tub removal and haul-off

Cast-iron or steel tub cut out and removed, surround stripped, and the alcove opened to bare framing.

Framing and subfloor check

Any rot at the old tub apron repaired, studs corrected, and blocking added for bars and glass.

Tub-to-Shower Conversion pricing in Conover

$8,991 – $14,991

BathPeak tub-to-shower conversions commonly fall within a general range of $8,991 to $14,991 depending on scope, materials, layout changes, and site conditions. Tile choice and glass are the two biggest movers inside that range for a Conover project.

Financing is available through Momnt Financing. Ask our team about current options during your consultation.

What moves the price

  • Subfloor repair at the old tub apron
  • Bench, niches and grab-bar blocking
  • Widening the alcove beyond the 60-inch standard
  • Valve upgrade to thermostatic with a handheld
  • Tile versus solid-surface wall panels

How your Conover project runs

We schedule Conover conversions 10 to 21 days from your signed quote. Timelines depend on scope and site conditions; you get a project-specific schedule before work begins.

  1. Step 1

    In-home consultation

    We measure the alcove, check drain size and framing, price the conversion in writing and review tile options.

  2. Step 2

    Order and schedule

    Approval releases materials; your install date is locked, typically 10 to 21 days out.

  3. Step 3

    Tub out

    Demo, framing and subfloor repair, drain conversion, pan built.

  4. Step 4

    Waterproof and tile

    Membrane, flood test, then wall and floor tile.

  5. Step 5

    Trim out

    Grout, valve trim, niche and bar install, glass template, full cleanup.

  6. Step 6

    Walkthrough

    We run the shower with you, check drainage and slope, and hand over the written warranty.

More detail on our full process and what the warranty covers.

Converting a compact Conover bath

Small rooms

Base, glass and vanity sized to fit.

Shallow vanity

Frees walking space.

Written schedule

Agreed before work starts.

Tub-to-Shower Conversion questions from Conover homeowners

More answers on our FAQ page.

Other bathroom services in Conover

Ready for your Conover tub-to-shower conversion?

Use the form above or request your free Conover quote on our contact page.

Call Now