Low-threshold walk-in shower with bench seating installed by BathPeak in a 1930s Dilworth home inside Route 4 in Charlotte, Mecklenburg County NC

Charlotte, NC · Mecklenburg County

Walk-In Shower Installation in Charlotte, NC

Turn a garden tub nobody uses, or a tub-plus-stall layout, into one walk-in shower sized for your Charlotte primary bath.

Typical investment
$8,991 – $14,991
Timeline
Project-specific timeline
Warranty
1-year workmanship

Walk-In Tub & Shower Conversion for Charlotte homes

Many Charlotte homes built from the mid-1990s onward — the kind found around Ballantyne, Blakeney, Highland Creek and Steele Creek — have a primary bath with a large soaking tub beside a small separate shower. When the tub sits unused, that combined floor space can often hold one roomy walk-in shower instead.

Inside the older ring — Dilworth, Elizabeth, Plaza Midwood — bathrooms are usually smaller and the question is different: whether an existing alcove can become a walk-in shower with a lower entry and a glass panel rather than a curtain.

We measure the room, check where the drain and valve sit, and talk through entry height, glass and seating before we write a single package price with the full scope of work.

See everything we do in Charlotte, or compare the full walk-in tub & shower conversion guide for our whole Charlotte Metro, NC service area.

Free Charlotte walk-in tub & shower conversion quote

Or call (336) 300-2524 and speak with our team now.

BathPeak serves Charlotte as part of its Charlotte Metro, North Carolina service area.

  1. Step 1: Project
  2. Step 2: Location
  3. Step 3: Timing
  4. Step 4: Investment
  5. Step 5: Contact

Step 1 of 5 · Project

What are you interested in?

Fully insured in NCRemodeling roots since 202230+ years combined install experience
Prefer to talk? Call (336) 300-2524
  • Fully insured in North Carolina
  • Permit requirements explained up front
  • Written package pricing · changes approved in writing
  • Project-specific timeline

Why Charlotte homeowners choose BathPeak

  • Free in-home consultation
  • Written project scope
  • Written package pricing
  • Changes approved in writing
  • Project-specific timeline
  • Daily cleanup and communication
  • 1-year workmanship warranty
  • Insured
  • Experienced installation team
  • Serving Charlotte
See how a BathPeak project works →

What a walk-in shower conversion in Charlotte includes

Waterproofing

A full bonded membrane over walls and pan, with corners and penetrations detailed by hand.

Tile or solid-surface walls

Porcelain tile, large-format panels or low-maintenance solid surface, whichever fits your cleaning tolerance and budget.

Bench, niche and bars

Built-in seating, recessed niches at the right height, and ADA-rated grab bars anchored into real blocking.

Valve, glass and trim

A pressure-balancing or thermostatic valve, handheld on a slide bar, and glass measured after tile so it fits the room as built.

Tub and surround removal

The old tub, wall surround and any rotted backer come out, with the alcove opened up so the framing can be inspected.

Framing and blocking

Studs corrected where needed, plus solid blocking for grab bars, a bench and the glass panel before anything gets closed in.

Walk-In Tub & Shower Conversion pricing in Charlotte

$8,991 – $14,991

We price Mecklenburg County conversions as a single written number covering demo, plumbing, waterproofing, tile, glass and cleanup — the full scope in writing, with no surprises later.

Financing is available through Momnt Financing. Ask our team about current options during your consultation.

What moves the price

  • Walk-in tub with a sealed door and heated seat
  • Alcove size and whether the opening widens
  • Curbless versus low-threshold entry
  • Relocating or resizing the drain
  • Tile versus solid-surface wall panels

How your Charlotte project runs

Timelines depend on scope and site conditions; you get a project-specific schedule before work begins. Custom glass can affect the overall schedule because final measurements and fabrication may occur after the shower area is installed.

  1. Step 1

    In-home consultation

    We measure the alcove, check the drain and framing, review entry height and hand you a written price.

  2. Step 2

    Order and schedule

    Materials are ordered after approval and the install date is locked, usually 10 to 21 days out.

  3. Step 3

    Demo and pan

    Tub out, framing checked, drain set, pan built and waterproofing started.

  4. Step 4

    Waterproof and tile

    Membrane completed and flood tested, then wall and floor tile set.

  5. Step 5

    Trim and finish

    Grout, valve trim, bench detail, grab bars, glass template and cleanup.

  6. Step 6

    Walkthrough

    We test the valve and drainage with you, review care instructions and hand over the warranty.

More detail on our full process and what the warranty covers.

Walk-in shower planning in Charlotte homes

Garden tub and stall footprints

Combining a soaking tub and a separate stall frees up floor space but can mean moving the drain. That decision is made after we see the actual plumbing.

Glass for a larger opening

Wider openings may suit a fixed panel or a frameless door. Custom glass is usually measured once the tile or wall panels are in.

Keep a tub somewhere?

If this is the home's only tub, we'll talk through resale and household needs before removing it.

Walk-In Tub & Shower Conversion questions from Charlotte homeowners

More answers on our FAQ page.

Other bathroom services in Charlotte

Ready for your Charlotte walk-in tub & shower conversion?

Use the form above or request your free Charlotte quote on our contact page.

Call Now